- 91 89511 93933 / 88677 30733
- fmt.traders07@gmail.com
- GST : 29AHFPV6933P1ZA
BS EN 573-3: 2009 → Aluminium Alloy 6063 / 6082 T6
Aluminium alloy 6063 is a medium strength alloy, commonly referred to as an architectural alloy. It is normally used in intricate extrusions.
It has a good surface finish, high corrosion resistance, is readily suited to welding and can be easily anodised.
Most commonly available as T6 temper, in the T4 condition it has good formability.
Rod & Bar – 10mm x 200mm Dia. & A/F
Tube – Up To 25mm Wall Thickness
| Alloy 6063 | Spec : BS EN 573-3: 2009 |
|---|---|
| Chemical Element | % Present |
| Manganese (Mn) | 0.0-0.10 |
| Iron (Fe) | 0.0-0.35 |
| Magnesium (Mg) | 0.45-0.90 |
| Silicon (Si) | 0.20-0.60 |
| Zinc (Zn) | 0.0-0.10 |
| Titanium (Ti) | 0.0-0.10 |
| Chromium (Cr) | 0.0-0.10 |
| Copper (Cu) | 0.0-0.10 |
| Other (Each) | 0.0-0.05 |
| Others (Total) | 0.0-0.15 |
| Aluminium (AI) | Balance |
| Rod & Bar -150mm to 200mm Dia & A/F | Spec : BS EN 755-2: 2008 |
|---|---|
| Mechanic Property | Value |
| Proof Stress | 160 Min MPa |
| Tensile Strength | 195 Min MPa |
| Hardness Brinell | 75 HB |
| Elongation A | 10 Min % |